Products catalogue

              Floor Screed Pump

FLOW MASTER WM-55S is a very powerful floor-screed pump. It is one of the best machines in the world thanks to its powerful diesel engine. The delivery rate is higher and the delivery distance is longer than its equivalents’. In addition to that, the hydraulic skip increases the work capacity as it leads to finish the application in shorter time. Its aesthetic and user-friendly design also contributes to its high performance rate. Its great design provides high efficiency.

The machine is located at the ground level. After mixing the components in the mixer, it can pump the screed up to the building floor where the floor-screed is applied. It is possible to pump screed up to 35th floor with the standard equipment.

FLOW MASTER WM-55S Floor Screed Pump with Hydraulic Skip is ideal for mixing and conveying floor-screed, sand, gravel, fine grained concrete and similar components with grain size up to 16 mm (32 mm is optional) and with appropriate viscosity.

 

                                                                                                 

     Mortar & Plaster Spraying Pump

        Products catalogue

It is one of the unique plaster machines, designed in particularly for external plastering with site mixes. This is a great product which modernizes the old and traditional methods of plastering with very practical and cost effective results.

The plaster components are manually mixed with water in the mixer. The mixer pours out the plaster mix into the pump when the loading arm is pulled. Then, it is pumped through the hose, and sprayed onto the surface where the plaster is applied.

It is ideal for the application of site mixes (ex. cement-sand), or dry premixed interior and exterior rendering, colored mortar, limestone mortar, base coat, light wall mortar, ornamental plaster, ready-mix plaster, liquid screed and for filling and grouting works

  • It is a very unique plaster machine which does not have any equivalent or similar.

  • It is the only plaster machine which has no limits and works at full performance.

  • It can pump all kinds of sand and similar materials.

  • It applies all kinds of mixes with the appropriate grain size and viscosity which will not block the hose.

  • Mixer is independent from the pump and works continuously.

  • It applies plaster smoothly and plaster does not fall off the surface.

  • It is a semi-automatic machine with a continuous mixer.

  • Mixer makes homogenous mixes.

  • Waste-consumption will not be experienced as the mix is homogenous.

  • Problems caused by blockage of the pump will not be experienced thanks to the homogenous mix.

  • Operator can stop/start the spraying automatically by the valve of the spray gun.

  • Mixer keeps working when the system is stopped by the valve of the spray gun

  • It is a qualified stationary pump which has the capacity to pump the mortar from ground to floors.

  • Its motor and reduction gear are very powerful.

  • It does not block the pump or cause any other trouble when stopped and re-started.

  • It can be used for conveying floor-screed, transferring mortar and grouting.

  • It is mobile.

  • Its trailer is robust and convenient for all conditions.

  • It can be pulled safely by a vehicle.

  • It is very practical and easy to dismount and clean the parts of the pump.

  • It will work for years like the first day if it is properly cleaned and maintained.

  • It has emergency button which will stop the machine in case of emergency.

  • It conforms to the European and world standards.

Icaro Bar Bending Machine Logo
Palme Makina Walk Behind Roller Compactor
Linosella Concrete Mixer
AMMANN Compaction Machines
ATMOS Screw Compressor